iDirect Evolution X1 Outdoor Satellite Router Installation and Safety Manual 53
Canadian Labeling Requirements
device. Operation with non-certified peripherals is likely to result in interference to radio and
TV reception.
To meet FCC requirements, shielded cables are required to connect the device to a personal
computer, peripheral, or other Class B certified device.
B.3 Canadian Labeling Requirements
iDirect Evolution X1 Outdoor Satellite Routers meet Canadian labeling requirements. This
Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 du Canada.
B.4 CE Compliance (European Union)
Marking by this symbol indicates the iDirect Evolution X1 Outdoor Satellite Routers are in
compliance with the following standards:
Modification of this equipment without written authorization
from iDirect may result in this equipment no longer
complying with FCC requirements for Class B digital devices.
In that event, the rights to use the equipment may be limited
by FCC regulations, and the user may be required to correct
any interference to radio or television communications at
their own expense.
EMC Emission EN 55022 Class B, FCC Part 15 Class B, CISPR 22 Class B, EN 61000-3-2,
EN 61000-3-3
EMC Immunity EN 55024, EN 301-489-1,EN 301-489-12, EN 61000-4-2, EN 61000-4-3,
EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
Safety IEC 60950, IEC/EN60950-1, UL 60950-1, CSA C22.2 No.60950-1-03
Radio (System Level) EN 301-428-V1.3.1 - Ku-Band
EN 301-443-V1.3.1 - C-Band
To Next Page
Loading...
