EasyManua.ls Logo

iDirect Evolution X1 - Default Chapter; Figure 6. Recommended Installation Tools; Section 5.1, Tools and Supplies; Table 10. Tools Included in the Order

iDirect Evolution X1
80 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20 iDirect Evolution X1 Outdoor Satellite Router Installation and Safety Manual
Tools and Supplies
5.1 Tools and Supplies
Table 10 specifies the tools that are included with the order and Figure 6 and Table 11
specify recommended tools and supplies for a typical installation.
Figure 6. Recommended Installation Tools
Table 10. Tools Included in the order
Quantity Tool
1
1.5 mm Allen wrench
Table 11. Recommended Installation Tools and Equipment
Quantity Tool
1 Number 2 Phillips screwdriver (for rack mounting)
1 F-Connector Compression Tool, such as: Holland Compression Tool 1855, see Figure 6
1 RG-6 Coax Stripper, see Figure 6
1 Coax / Wire Cutter, see Figure 6
1 SOJW 18AWG (OD (outdoor) must comply with AC connector), AC Power Cable
Where: S - Service Grade, O - Oil Resistant, a single O means only the outer jacket is oil
resistant, J - Hard Service, W - Outdoor rated, includes sunlight resistant jacket and wet
location rated conductors, 18AWG - 18 American Wire Gauge
Reference http://en.wikipedia.org/wiki/American_wire_gauge
2 F-type weatherproof outdoor connectors with weatherproofing gasket (O-ring), such as:
Holland SLCU6-Q0, see labeled figures A and B in Figure 22 on page 60

Table of Contents

Other manuals for iDirect Evolution X1

Related product manuals