iDirect Evolution X1 - Figure 7. Packaged Items; Other Components Typically Included in an Order; Section 5.4, Other Components Typically Included in an Order

22 iDirect Evolution X1 Outdoor Satellite Router Installation and Safety Manual
Other Components Typically Included in an Order
3. 2 (two) hardware mounting kits (one for the iDirect Evolution X1 Outdoor Satellite Router
and one for the Power Module for wall or pole mounting, see Figure 7 on page 22, items
labeled A and E. Package A (part number GTT:GLBAC-WALLMOU-SCC-M) with M6 screws for
the X1 Outdoor Satellite Router mounting plates, and Package E (part number GTT:GLBAC-
WALLMOU-SCC) with M5 screws for the Power Module mounting plates.
4. 1 (one) Power Module AC-DC power gland, which includes a small Allen wrench, see Figure
7 on page 22, item labeled B.
5. 1 (one) LAN Ethernet gland, see Figure 7 on page 22, item labeled C.
6. 1 (one) DC 6 foot power cable, see Figure 7 on page 22, item labeled D.
Figure 7. Packaged Items
5.4 Other Components Typically Included in an Order
Other items that could be included in the order might be:
• High speed Ethernet LAN cable
• An antenna ranging in size from 0.75m, 0.96m, 1.2m, 1.8m, or 2.4m for Ku-Band; and
1.8m, 2.4m, and 3.8m for C-Band
• IFL cable
• An appropriate feed assembly for the antenna (OMT)
• Block Up Converter (BUC); 1.5W or 3W for Ku-Band and C-Band
• Low Noise Block converter (LNB)