iDirect Evolution X1 - Figure 13. Mounting the Power Module

28 iDirect Evolution X1 Outdoor Satellite Router Installation and Safety Manual
Mounting the External Power Module to a Wall or Pole
Attaching the Mounting Plate
To mount the Power Module, first attach the mounting plate using the M6x20 screws as shown
in Figure 13.
Figure 13. Mounting the Power Module
CAUTION
The Power Module must be wall or pole
mounted with the cable and power
connectors on the bottom of the unit, facing
downward.
The Power Module should be installed
below or side-by-side the iDirect Evolution
X1 Outdoor Satellite Router if installed on
poles.