IFM AC1421 - Install the Ifm Package; Update Ifm Package; Ifm Programming Manual AS-I Gateway AC14 (4.2.X)

13
ifm Programming Manual AS-i Gateway AC14 (4.2.x) 12/2017
Installation ifm AS-i Package
>
4.2.2 Install the ifm package
7283
To install the package "CODESYS for ifm SmartPLC StandardLine":
Requirements:
> CODESYS 3.5 SP9 Patch 7 Hotfix 3 is installed on the programming PC/notebook.
1 Start CODESYS
► Start CODESYS with administrator rights.
> CODESYS programming interface appears.
2 Install the ifm package in CODESYS
► Select [Tools] > [Package Manager].
> Window [Package Manager] is displayed.
► Click on [Install...] to start the installation dialogue.
► Select the downloaded ifm package and carry out a complete installation.
> The [Package Manager] window displays the installed ifm package.
► Press [Exit] to close the package manager.
>
4.2.3 Update ifm package
12267
To update an installed package "CODESYS for ifm SmartPLC StandardLine":
1 Download new version of the ifm package
► Got to the product page of the device on the ifm website.
► Download ifm_SmartPLC_StandardLine_V1_6_4_14.package and save it on the CODESYS PC/laptop.
2 Uninstall the old version of the ifm package
► → Uninstall the ifm package (→ p. 14)
3 Install a new version of the ifm package
► → Install the ifm package (→ p. 13)
4 Update device libraries
► In the device tree: Click on [Device (ifm_SmartPLC_StandardLine)].
► Select [Project] > [Update Device].
> [Update Device] windows appears.
► Click on [Update Device] to start the update process.
> New device libraries are loaded.
> Project tree view is updated.
► Click on [Exit] to close the Package Manager.
► Save the project.