48
ifm Programming Manual AS-i Gateway AC14 (4.2.x) 12/2017
Operation Transfer CODESYS project to device
>
8.1 Transfer CODESYS project to device
Activate CODESYS PLC ........................................................................................................................49
Download the application to the device ..................................................................................................50
Delete application from AS-i Gateway AC14 ..........................................................................................50
Delete boot application via SD card .......................................................................................................51
18490
► Familiarise yourself with the following CODESYS functions!
Compile project/application and transfer it to device
→ Online help > CODESYS Development System > Transferring Applications to the
PLC
To save the CODESYS project on the device the following component must be transferred to the
device:
application "Application" (→ Download the application to the device (→ p. 50))
► Observe notes on the operating modes of the PLC of the device!
→ Operating states of the PLC (→ p. 52)
ifm system solutions and CODESYS applications created by the user must not be saved and
executed on the device at the same time!
► Before loading an application to the device delete all ifm system solutions saved on the
device (→ Device manual, Uninstall ifm apps)!
To be able to use an ifm system solution in a user project the functions must be integrated into
the project via libraries to be ordered separately.
► Contact the AS-i specialist of ifm electronic!
To Next Page
Loading...
