IFM AC1421 - Supported Programming Languages; Change System Time of the Device

26
ifm Programming Manual AS-i Gateway AC14 (4.2.x) 12/2017
Programming Create PLC application
>
7.2.2 Supported programming languages
18034
The following table shows which programming languages according to IEC 61131 are supported by
the ifm function libraries:
Library
Funct
ion Block Diagram (FBD)
Sequential Function Chart (SFC)
Instruction List (IL)
Continuous Function Chart (CFC)
Ladder Diagram (LD)
Structured Text (ST)
ACnnnn_Utils.library
X
X
X
X
X
X
ACnnnn_SYS_CMD.library
X
X
X
X
X
X
Legend:
X ... is supported
>
7.2.3 Change system time of the device
18271
WARNING
Risk of undesired system behaviour!
The use of the CODESYS function SysTimeRtcSet for setting the time may lead to malfunction.
► To set the system time (date, time) of the device only use the following device-specific commands:
 Function block Set_DateTime (→ Set_TimeDate (→ p. 111))
 System command 0x1109 with function block ACnnnn_SysCmd (→ ACnnnn_SysCmd
(→ p. 121))