ILX Lightwave LDC-3700 Series User Manual

SYNTAX DIAGRAM
PARAMETERS None. The response will be in the form:
-where the
response is an <nrf value>.
POINTS OF
INTEREST
The
current limit is valid for all modes of Laser operation
In local operation, the limit current value is read by selecting the LIM I parameter, and
visually reading the LASER display.
EXAMPLES
"LAS:LIM:15'In
-response: 400, means the laser current limit is 400 mA (LDC-3722B only).
"Laser:LIM:IS?" -response: 50, means the laser current limit is 50 mA.
Front Panel LASer: L1Mit:MDP
Remote
The LASer:LMt:MDP command sets the laser monitor photodiode power limit value.
SYNTAX DIAGRAM
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ILX Lightwave LDC-3700 Series Specifications

General

Brand	ILX Lightwave
Model	LDC-3700 Series
Category	Controller
Language	English