ILX Lightwave LDC-3700 Series User Manual

The syntax for the *RST command is:
The Save command stores the current state of the LDC-3700 Series Laser Diode Controller in non-volatile local
memory. A particular state is then recalled by using the *RCL recall command (see Section 3.3.17). There are 10
unique states which can be stored. The syntax of the *SAV command is:
<DECIMAL
NUMERIC
PROGRAM DATk
-where the data value must round off to an integer between 1 and 10. The rounded integer value corresponds to a
unique saved state which can be recalled by using the same value with the *RCL command.
3.4.17 *SRE
The Service Request Enable command sets the Service Request Enable Register bits to allow the LDC-3700 Series
Laser Diode Controller to generate the user-selectable service requests. The syntax of the *SRE command is:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ILX Lightwave LDC-3700 Series Specifications

General

Brand	ILX Lightwave
Model	LDC-3700 Series
Category	Controller
Language	English