ILX Lightwave LDC-3700 Series User Manual

Front Panel LASer: ENABle:OUTOFF?
W Remote
The LASer:ENABle:OUTOFF?
query returns the value of the status outoff enable register of the LASER
operations.
SYNTAX DIAGRAM
PARAMETERS
None. The response
will be in the form:
-where the response
is the sum of the followbg:
C
1 - LASER Current Limit
256
- NIA
2
- LASER Voltage Limit
5 12
- Output is Out of Tolerance
4 - NIA
1024
- TEC Output OB
, x 8 - Power Limit (With Output On)
<2048 - TEC High Temperature Limit Condition
i, 16 - NIA
40% - N/A
32 - NIA
8192 - NIA
64 - NIA
16384 - NIA
128
- NIA
32768 - NIA
POINTS OF
INTEREST
The enabled LASER events
can be set by using the LASer:ENABle:OUTOFF command. The
LASER output status can be monitored by the LASer:EVEnt? query.
EXAMPLES
"LAS:ENAB:OUTOFF?" -response:
2049, means that TEC High Temperature Limit and
Current Limit Conditions will cause the LASER output to be turned off.
"Radix Hex; Las:Enab:Eve?" -response: #HEOB, means that all of the above conditions will
cause the LASER output to be turned off.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ILX Lightwave LDC-3700 Series Specifications

General

Brand	ILX Lightwave
Model	LDC-3700 Series
Category	Controller
Language	English