ILX Lightwave LDC-3700 Series User Manual

This query places an ASCII character 1 into the LDC-3700 Series Laser Diode Controller's Output Queue when all
pending operations have been finished. (See also Section 3.7.2).
The syntax for the *OK? query is:
The Power-on Status Clear command controls the automatic power-on clearing of the Service Request Enable
Register, the Standard Event
Status Enable Register, the Event Status Enable Register, the Condition Status Enable
Register,
and the Parallel Poll Enable Register. The syntax for this command is:
white <DECIMAL
space* NUMERIC
I I I PROGRAM DATA>
I '
where the data is a Boolean value:
0 -
Power-on-statusclear flag is set FALSE, therefore allowing SRQ intempts after power on.
1 - Power-on-status-clear flag is set TRUE, therefore clearing all enable registers and
disallowing SRQ interrupts to be asserted after power-on.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

ILX Lightwave LDC-3700 Series Specifications

General

Brand	ILX Lightwave
Model	LDC-3700 Series
Category	Controller
Language	English