Item Description
AUTO POWER
Automatically turns the projector off after no signals are detected for
30 minutes.
Please refer to Turning off the power
(
17).
USB TYPE B
Using the ▲/▼ buttons selects the USB TYPE B port feature.
To use this feature, you need to connect the USB TYPE B projector
port and the type A USB port of a computer.
MOUSE
ó
USB DISPLAY
MOUSE : The projector remote control will operate simple mouse
and keyboard functions of the computer.
USB DISPLAY : Image signals from a computer will be transmitted
through the USB TYPE B port (
79).
• It may take several seconds to project images from the USB TYPE
B port.
• In the following scenarios, a message will appear notifying you
that USB TYPE B port is not available for image input (together with
the USB TYPE B dialog):
- The setting is switched to MOUSE when an image from the
USB
TYPE B port is projected.
- The
USB TYPE B port is selected for image input when this setting
is set to MOUSE. Select USB DISPLAY in the dialog to project the
image input to the USB TYPE B port. In this case, you cannot use
the simple mouse and keyboard feature. Select another port for
image input if mouse/keyboard functionality is desired.
(continued on next page)
To Next Page
Loading...
