Ingenico iCT250 User Manual

SKYZER TECHNOLOGIES PAGE 26 OF 116
NITRO INGENICO ICT250 AND IWL252 2015 PAYMARK SOFTWARE OPERATING GUIDE Version 1.0
2.4.3.3 Contactless Card
Bring the card firmly up to the active zone above the display (at about 1cm).
Keep the card close to the display during the transaction.
Your contactless terminal has a row of four status lights that are visible on
display.
o When a contactless transaction is started the first (left hand) status light
will be steadily; this indicates that the contactless display is in use but a
card is not being read.
o When the contactless card is presented to the contactless active zone
during a transaction the second, third and fourth status lights will be lit in
turn. The card read is successful all four status lights are lit and the
confirmation tone is heard.

Ingenico iCT250 Specifications

General

Memory	16 MB RAM, 128 MB Flash
Card Readers	Magnetic stripe, Smart card, Contactless
Operating System	Telium 2
Connectivity	Ethernet
Security	PCI PTS 3.x certified
Printer	Integrated thermal printer
Supported Cards	Visa, Mastercard, American Express, Discover
Display	128x64 pixel LCD, Backlit
Power Supply	External power adapter