Ingenico iCT250 User Manual

SKYZER TECHNOLOGIES PAGE 93 OF 116
NITRO INGENICO ICT250 AND IWL252 2015 PAYMARK SOFTWARE OPERATING GUIDE Version 1.0
11.2.4 Settlement Cutover
This function allows the merchant to settle the current settlement period and to
cut over to a new settlement period. This can only be performed successfully
when the terminal is within the ‘settlement window’ defined by Paymark for the
particular merchant and terminal.
Select the Settlement function on the POS system which will display the
function as below:
Select SETTLE to perform the Cut over. A window will be displayed as below.
Select YES to proceed with the cut over or NO to cancel and returned to
preivous screen. If proceeded with the cut over, the amount will be depoisted
to the merchants account as shown below.

Ingenico iCT250 Specifications

General

Memory	16 MB RAM, 128 MB Flash
Card Readers	Magnetic stripe, Smart card, Contactless
Operating System	Telium 2
Connectivity	Ethernet
Security	PCI PTS 3.x certified
Printer	Integrated thermal printer
Supported Cards	Visa, Mastercard, American Express, Discover
Display	128x64 pixel LCD, Backlit
Power Supply	External power adapter