Ingenico iCT250 User Manual

SKYZER TECHNOLOGIES PAGE 114 OF 116
NITRO INGENICO ICT250 AND IWL252 2015 PAYMARK SOFTWARE OPERATING GUIDE Version 1.0
15.13 REPLACING SIM CARD COMPARTMENT COVER
Replace the cover as illustrated by the procedure below:
15.14 INSTALLING SIM CARD FOR GPRS
Before starting, switch of the terminal by disconnecting the power supply.
o Open the cover as indicated at chapter 7.9
o Insert the SIM card into the slot marked (GPRS) as indicated out in the
figure. Do not force at the insertion.
Take care to ensure that the SIM card is inserted in the correct manner.
The insertion position is engraved on the terminal.
o To remove the SIM card from the GPRS slot, push on it with your finger
nail to slide it out.

Ingenico iCT250 Specifications

General

Memory	16 MB RAM, 128 MB Flash
Card Readers	Magnetic stripe, Smart card, Contactless
Operating System	Telium 2
Connectivity	Ethernet
Security	PCI PTS 3.x certified
Printer	Integrated thermal printer
Supported Cards	Visa, Mastercard, American Express, Discover
Display	128x64 pixel LCD, Backlit
Power Supply	External power adapter