Ingenico iCT250 User Manual

SKYZER TECHNOLOGIES PAGE 80 OF 116
NITRO INGENICO ICT250 AND IWL252 2015 PAYMARK SOFTWARE OPERATING GUIDE Version 1.0
9.1.2 Pure Commerce CSE Configuration
Step
Terminal Display
Comment
1.0
NITRO
Press FUNC
2.0
FUNCTION?
Enter 3025703 and press ENTER.
3.0
CONFIG PARAMS?
ENTER OR CLEAR
ENTER to configure the parameters or CLEAR to cancel and exit to idle prompt.
4.0
TERMINAL ID?
XXXXXXXX
This parameter specifies the Pure Commerce CSE Terminal ID assigned by Pure
Commerce.
By default the BNZ CSE terminal ID will be same as the
Paymark terminal ID
5.0
MERCHANT ID?
XXXXXXXXXXX
This parameter specifies the DCC Merchant ID assigned by Pure Commerce. By
default the Pure Commerce CSE merchant ID will be same as the Paymark
Merchant ID
6.0
PRIMARY
HOST PORT
6880
This parameter specifies the Primary Host Port for Pure Commerce CSE. Press
ENTER.
Be default it is set to 6880
7.0
SECONDARY
HOST PORT
6880
This parameter specifies the Secondary Host Port for Pure Commerce CSE. Press
ENTER.
By default it is set to 6880
8.0
RATE SERVER
HOST DNS
www.currencyselect
.bnz.co.nz
This parameter specifies the Rate Server Host DNS for Pure Commerce CSE. Press
ENTER.
By Default it is set to www.currencyselect.bnz.co.nz
9.0
RATE SERVER
HOST DNS
bnz.pure-
commerce.com
This parameter specifies the Rate Server Host DNS for Pure Commerce CSE. Press
ENTER.
By default it is set to bnz.pure-commerce.com
10.0
USER NAME
skzyerprod01
A default username has be preset for Skyzer terminals
By default it is set to skzyerprod01
11.0
PASSWORD
**********
The default password is preset to x79F0vQh

Ingenico iCT250 Specifications

General

Memory	16 MB RAM, 128 MB Flash
Card Readers	Magnetic stripe, Smart card, Contactless
Operating System	Telium 2
Connectivity	Ethernet
Security	PCI PTS 3.x certified
Printer	Integrated thermal printer
Supported Cards	Visa, Mastercard, American Express, Discover
Display	128x64 pixel LCD, Backlit
Power Supply	External power adapter