Ingenico iCT250 - TCP-IP (Broadband) RKI Configuration

SKYZER TECHNOLOGIES PAGE 65 OF 116
NITRO INGENICO ICT250 AND IWL252 2015 PAYMARK SOFTWARE OPERATING GUIDE Version 1.0
6.6.1.2 TCP-IP (Broadband) RKI Configuration
Step
Terminal Display
Description
1.0
NITRO
Press FUNC
2.0
FUNCTION?
Enter 7418, press ENTER
3.0
SELECT OPTION
1. RKI CONFIG
2. ENABLE CTL
3. ENABLE RCPT HDR
4. ENABLE MERC
RCPT
Select option 1 for RKI configuration by pressing the corresponding number key
4.0
RKI CONFIG?
ENTER OR CLEAR
Press ENTER to proceed with the RKI configuration or CLEAR to cancel and exit to
idle screen
5.0
NII?
018
This parameter specifies the Network International Identifier that the terminal uses
to route messages to Paymark.
Press ENTER.
6.0
RKI
HOST IP ADDRESS
117.120.34.103
This parameter specifies the RKI HOST IP ADDRESS of the Paymark, where it will
be connecting to download the keys. By default, the RKI (PKMS) Host IP Address is
set as 117.120.34.103.
7.0
RKI
HOST PORT
7540
This parameter specifies the RKI HOST PORT of the Paymark, where it will be
connecting to download the keys. By default, the RKI (PKMS) Host Port is set as
7540.