Ingenico iCT250 User Manual

SKYZER TECHNOLOGIES PAGE 38 OF 116
NITRO INGENICO ICT250 AND IWL252 2015 PAYMARK SOFTWARE OPERATING GUIDE Version 1.0
5.2 Deactivating an iPP280 PIN Pad
To deactivate an iPP280 PIN pad, perform the steps below:
Step
Terminal Display
Comment
1.0
NITRO
Press FUNC
2.0
FUNCTION?
Enter 77 and press ENTER.
3.0
DISABLE
EXTERNAL PINPAD
Press ENTER to disable the external pinpad port on the terminal or CLEAR to
cancel and exit to idle prompt.
4.0
RESTARTING
TERMINAL....
Terminal and PIN pad will be restarted and PIN pad will be disabled.
5.0
:-)
PIN pad will display a smiley face on the screen once deactivated. Simply uncover
the rear compartment of the ICT2XX terminal and unplug the PIN pad USB cable
and then replace the cover back on the ICT2XX terminal.

Ingenico iCT250 Specifications

General

Memory	16 MB RAM, 128 MB Flash
Card Readers	Magnetic stripe, Smart card, Contactless
Operating System	Telium 2
Connectivity	Ethernet
Security	PCI PTS 3.x certified
Printer	Integrated thermal printer
Supported Cards	Visa, Mastercard, American Express, Discover
Display	128x64 pixel LCD, Backlit
Power Supply	External power adapter