Ingenico iWL25 Series - Page 125

SKYZER TECHNOLOGIES PAGE 125 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
PRESS 2: Display KVC and print Terminal Configuration
PRINTING
Terminal will display KVC and prompt to PRINT CONFIG Y/N.
Press ENTER to print off the terminal configuration report or CLEAR to exit and
return to idle screen.
PRESS 3: Print EMV or CTL Public Keys
PRINT
1. EMV PUBLIC KEYS
2. CTL PUBLIC KEYS
Press 1 to print off the EMV public keys or 2 to print off the CTL public keys.
PRINTING
Displays while printing the check sum value of all EMV or CTL public keys stored
within the terminal. If the terminal has no stored EMV public keys then it will display
“NO PUBLIC KEYS” and “NO CTL KEYS” if no stored CTL public keys.
PRESS 4: Print EMV Enable Applications or CTL Configurations
PRINT
1. EMV APPS
2. CTL CONFIG
Press 1 to print off the current enabled EMV Application Identifiers (AIDs) or 2 to
print off the CTL configuration records.
PRINTING
Displays while printing a list of all the currently enable EMV Application Identifiers
(AIDs) or CTL configuration records supported by the terminal. If the terminal has
no EMV applications it will display “NO EMV APPS” and “NO CTL RECORDS” if no
CTL configuration records.
PRESS 5: Print Pending Transactions
PRINT PENDING
TRANS.
SELECT OPTION
1. PRINT ALL
2. PRINT HOSP
TRANS
3. PRINT TIP TRANS
Press 1 to print all the pending transactions that are stored on the terminal or 2 to
print off a specific Hospitality transaction or 3 to print off a specific Tipping
transaction.
PRINTING
PRINTING displays while printing the pending transactions. If the terminal has no
pending transactions it will display “NO PENDING TRANSACTIONS”.
PRESS 6: Print Last EMV Transaction
PRINTING
PRINTING displays while printing the last EMV transaction. If the terminal has no
EMV transactions it will display “NO EMV TRANSACTIONS”.