Ingenico iWL25 Series - Enable;Disable Terminal Functions

SKYZER TECHNOLOGIES PAGE 44 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
5.8 ENABLE/DISABLE TERMINAL FUNCTIONS
This menu allows certain terminal functions to be enabled or disabled as
required.
NOTE: To enable or disable any function in the terminal, press the F1 key (left
soft key on the terminal) to toggle between ON and OFF and to scroll back to
the previous function, press the CLEAR key.
Step
Terminal Display
Comment
1.0
Press FUNC
2.0
FUNCTION?
Key in 7415 followed by ENTER
3.0
CASH OUT
ON
Press F1 to enable or disable the CASH OUT function followed by ENTER.
4.0
PURCHASE + CASH
ON
Press F1 to enable or disable the PURCHASE + CASH function followed by
ENTER.
5.0
CTL RECEIPT
ON
Press F1 to enable or disable the CONTACTLESS RECEIPT function followed by
ENTER.
6.0
PRE-PRINTING
OFF
Press F1 to enable or disable the PRE-PRINTING function followed by ENTER.
By default the Pre-printing is disabled.
7.0
CHEQUE AUTH
OFF
Press F1 to enable or disable the CHEQUE AUTHORISATION function followed by
ENTER.
8.0
INSTANT TIPPING
OFF
Press F1 to enable or disable the INSTANT TIPPING function followed by ENTER.
9.0
CC HOSPITALITY
OFF
Press F1 to enable or disable the CREDIT CARD HOSPITALITY function followed
by ENTER.
10.0
PRINT CUST COPY
ON
Press F1 to enable or disable the CUSTOMER COPY function followed by ENTER.
This function enables the merchant to print only merchant copy receipt
11.0
PROMPT CUST COPY
OFF
Press F1 to enable or disable the PROMPT CUSTOMER COPY function followed
by ENTER. This function gives the merchant an option to print both merchant and
customer copy or just a merchant copy.
12.0
ALERT DECLINE
ON
Press F1 to enable or disable the ALERT DECLINE function followed by ENTER.