SKYZER TECHNOLOGIES PAGE 91 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
‘Transaction Void’ receipt is printed.
12.9.3.2 Uploading Tip Transactions
This function is used by the merchant to transmit all stored credit card tip
transactions.
TIPPING
1.AUTHORISATION
2.TIP ADJUST
3.UTIL
Press ENTER to scroll through the menu options until the TIPPING menu is
shown on the display.
Press 3 to select UTIL.
SELECT FUNCTION
1. VOID TIP
2. UPLOAD
3. PRINT
Select the desired function by pressing the corresponding number key.
Example: Select 2 to perform UPLOAD FUNCTION.
TIP TRANSACTIONS
TOTAL $XX.XX
TOTAL OK? Y/N
Displays the total tip transactions that are currently stored on the terminal.
(NOTE: Check to see if the Total Amount matches the Total Amount of your tip
transaction receipts)
If the TOTAL is correct, press ENTER to upload the stored TIP transactions and
if the TOTAL is not correct, press CLEAR to exit and proceed with step 6.0
PROCESSING NOW X OF XX displays while uploading the stored tip
transactions and once finished, returns to idle screen.
Example: Processing 1 of 10, etc.
Once all the transactions are sent, the screen will display “TRANSMISSION
COMPLETE”
Press ENTER to view transactions to modify the tip transaction amounts of the
stored advices or CLEAR to exit and return to idle screen.
NOTE: If the terminal is in the process of uploading the stored tip transactions to
Paymark network and merchant wishes to use the EFTPOS terminal, they can
interrupt the upload by simply swiping the card at any stage where it may take
few seconds before terminal prompts “TEMPORARILY HALT TRANSMISSION Y/N”.
The merchant can then press ENTER to halt the upload transmission and
perform a transaction or CLEAR to proceed with uploading stored tip
transactions.
To Next Page
Loading...
Need help?
General
