Ingenico iWL25 Series - IWL 252 Bluetooth Terminal;Base Pairing and Un-Pairing Functions

SKYZER TECHNOLOGIES PAGE 24 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
4 IWL 252 Bluetooth Terminal/Base Pairing and Un-
pairing Functions
The iWL252 Bluetooth terminal requires pairing, or associating with its base
before use. When paired, the terminal must be returned and correctly
positioned on its base. A terminal that has been paired to a base can only
be re-assigned to a new base when it is unpaired, or disassociated from its
original base.
Note: The base must be powered-on to perform the pairing and un-
pairing
functions
Step
Terminal Display
Comment
1.0
Press MENU
2.0
PAYMARK EFTPOS
EFTPOS MENU
TIPPING MENU
HOSPITALITY MENU
ADMIN MENU
SUPERVISOR MENU
Enter 0 (Zero) Key
3.0
ENTER PASSWORD?
Key in 6988 or 62624371 followed by ENTER
4.0
FUNCTIONS
0-TELIUM MANAGER
Press 0 (Zero) to select TELIUM MANAGER
NOTE: DO NOT SELECT ANY OTHER FUNCTIONS
5.0
TELIUM MANAGER
1-Cancel
2-Consultation
3-Refund
4-Evolution
5-Initialization
Press 5 to select INITIALIZATION
NOTE: DO NOT SELECT ANY OTHER FUNCTIONS
6.0
INITIALIZATION
1-Parameters
2-Hardware
3-Screen Saver
4-Password
Press 2 to select HARDWARE
NOTE: DO NOT SELECT ANY OTHER FUNCTIONS