Ingenico iWL25 Series - Pure Commerce CSE Configuration

SKYZER TECHNOLOGIES PAGE 58 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
9.1.2 Pure Commerce CSE Configuration
Step
Terminal Display
Comment
1.0
Press FUNC
2.0
FUNCTION?
Enter 3025703 and press ENTER.
3.0
CONFIG PARAMS?
ENTER OR CLEAR
ENTER to configure the parameters or CLEAR to cancel and exit to idle prompt.
4.0
TERMINAL ID?
XXXXXXXX
This parameter specifies the Pure Commerce CSE Terminal ID assigned by Pure
Commerce.
By default the BNZ CSE terminal ID will be same as the
Paymark terminal ID
5.0
MERCHANT ID?
XXXXXXXXXXX
This parameter specifies the DCC Merchant ID assigned by Pure Commerce. By
default the Pure Commerce CSE merchant ID will be same as the Paymark
Merchant ID
6.0
PRIMARY
HOST IP ADDRESS
210.50.6.12
This parameter specifies the Primary Host IP Address for Pure Commerce CSE. Press
ENTER.
By Default it is set to 210.50.6.12
7.0
PRIMARY
HOST PORT
6880
This parameter specifies the Primary Host Port for Pure Commerce CSE. Press
ENTER.
Be default it is set to 6880
8.0
SECONDARY
HOST IP ADDRESS
210.50.6.12
This parameter specifies the Secondary Host IP Address for Pure Commerce CSE.
Press ENTER.
By Default it is set to 210.50.6.12
9.0
SECONDARY
HOST PORT
6880
This parameter specifies the Secondary Host Port for Pure Commerce CSE. Press
ENTER.
By default it is set to 6880
10.0
USER NAME
skzyerprod01
A default username has be preset for Skyzer terminals
By default it is set to skzyerprod01
11.0
PASSWORD
**********
The default password is preset to x79F0vQh