SKYZER TECHNOLOGIES PAGE 13 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
2.1.3.3 Contactless Card
Bring the card firmly up to the active zone above the display (at about 1cm).
Keep the card close to the display during the transaction.
Your contactless terminal has a row of four status lights that are visible on
display.
o When a contactless transaction is started the first (left hand) status light
will be steadily; this indicates that the contactless display is in use but a
card is not being read.
o When the contactless card is presented to the contactless active zone
during a transaction the second, third and fourth status lights will be lit in
turn. The card read is successful all four status lights are lit and the
confirmation tone is heard.
To Next Page
Loading...
