Ingenico iWL25 Series - 6 Skylink; And 2 Way Interface Link; Skylink Interface Type

SKYZER TECHNOLOGIES PAGE 49 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
6 SKYLINK
6.1 1 and 2 Way Interface Link
Ingenico terminals have been certified to link directly for interfacing as 1 or 2
way on approved POS system by Skyzer Technologies.
Please contact Skyzer Technologies to obtain a list of Accredited POS Vendor
List for interfacing.
6.1.1 SKYLink Interface Type
This function provided the option for the interface link that Ingenico terminal
supports.
Perform the steps below to select the appropriate interface type.
NOTE: Please ensure that INTERFACED is enabled through FUNC 7415 prior to
selecting interface type.
Step
Terminal Display
Description
1.0
Press FUNC
2.0
FUNCTION?
Enter 6628 and press ENTER
3.0
INTERFACE TYPE
1-SKYZER
2-LEGACY
3-CASIO
4-SHARP
Press the corresponding number key to select the appropriate interface type followed
by ENTER key.
1-SKYZER (supports 2 way interface link. Also supports Quest (V-Touch and Versa
Term) POS system as 1 way link)
2-LEGACY (supports 1 way interface link for TOWA model. Please see accredited
POS Vendor List for models)
3-CASIO (Supports 1 way interface link for Casio models)
4-SHARP (Supports 1 way interface link for Sharp models. Please note that Sharp
POS system is not compatible currently with iCT/iWL terminals)