Ingenico iWL25 Series - Contactless Configuration

SKYZER TECHNOLOGIES PAGE 39 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
5.5.1 Contactless Configuration
This function allows the merchant to activate the contactless functionality on
the iWL250 device.
Perform the following steps to enable contactless.
Step
Terminal Display
Description
1.0
Press F (MENU)
2.0
PAYMARK EFTPOS
1.EFTPOS MENU
2.TIPPING MENU
3.HOSPITALITY MENU
4.ADMIN MENU
5.SUPERVISOR MENU
Press 0 (Zero) key
3.0
ENTER PASSWORD?
Enter 6988 followed by ENTER
4.0
FUNCTIONS
0 – TELIUM MANAGER
Press 0 (Zero) to select TELIUM MANAGER
NOTE: DO NOT SELECT ANY OTHER FUNCTIONS
5.0
TELIUM MANAGER
1-Cancel
2-Consultation
3-Refund
4-Evolution
5-Initialization
Press 5 to select Initialization
NOTE: DO NOT SELECT ANY OTHER FUNCTIONS
6.0
INITIALIZATION
1 - Parameters
2 - Hardware
3 - Password
4 - Header
5 – Beep on Key
Press 1 to select Parameters
NOTE: DO NOT SELECT ANY OTHER FUNCTIONS