SKYZER TECHNOLOGIES PAGE 15 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
2.1.5 Installing the Battery
• Turn the terminal over and unclip the cover by pushing on the clips with
your nails as shown by the arrows in the picture.
• Take out the battery pack which is included in the box and locate the
battery’s connector beside the battery compartment.
• Plug the battery pack connector into the socket, making sure it clicks
into place, as shown.
• Place the battery pack into its compartment.
• Check that the wires are flat and close the cover.
To Next Page
Loading...
