Ingenico iWL25 Series - Surcharge; EFTPOS Configuration for Credit Card Surcharging

SKYZER TECHNOLOGIES PAGE 68 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
12 SURCHARGE
This functionality allows the merchant to apply a Credit card surcharge to the
cardholder for goods and services paid by credit card.
12.1 EFTPOS CONFIGURATION FOR CREDIT CARD SURCHARGING
This function allows the merchant to enable or disable the credit card
surcharge on the terminal.
12.1.1 Enable Credit Card Surcharging
Perform the steps below to enable credit card surcharge.
Step
Terminal Display
Comment
1.0
Press FUNC
2.0
FUNCTION?
Enter 8 and press ENTER
3.0
ENABLE
SURCHARGING?
Press ENTER to enable Surcharging.
4.0
ENTER SURCHARGE
PERCENT (1-10)
0.00
This parameter specifies the credit card surcharge percent to apply for credit card
transaction. Please enter surcharge percent between 1 and 10 with 2 decimal
points.
Press ENTER
5.0
ENTER SURCHARGE
MINIMUM AMOUNT
1.00
This parameter specifies minimum amount to have to apply the credit card
surcharge.
Press ENTER.