SKYZER TECHNOLOGIES PAGE 41 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
5.6 SINGLE MERCHANT MEMORY RESET CONFIGURATION
This function allows the merchant configuration to be reset to factory default
values.
Enter 9902 and press ENTER.
RESET
MERCHANT CONFIG
ENTER OR CLEAR
Press ENTER to reset the merchant configuration or CLEAR to cancel and return to
idle screen.
1 Merchant 1
2 Merchant 2
3 Merchant 3
Only applicable with Multi-Merchant setup.
Select the corresponding number on the terminal to select the Merchant followed by
ENTER.
Terminal displays PLEASE WAIT while retrieving the default merchant
configuration.
Terminal prompts ETSL EFTPOS MEMORY RESET while resetting the merchant
configuration and returns to idle.
NOTE: The above function is performed to delete the configuration for the
selected merchant only.
To Next Page
Loading...
Need help?
General
