EasyManua.ls Logo

Ingenico iWL25 Series - Bluetooth Communication Icon Status

Ingenico iWL25 Series
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SKYZER TECHNOLOGIES PAGE 20 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
2.2.1 Bluetooth Communication Icon Status
Ingenico IWL252 terminals support Bluetooth communications to pass and
receive data with a base. To provide the status of the Bluetooth link, the
following icons will be displayed in segment 2 of the status header
If terminal exceeds maximum operating range from its Base, the
Bluetooth link is broken, and only this icon will be displayed.
When Terminal is within range of its Base and Bluetooth link has
been
interrupted, this icon is displayed until connection is re-
established.
When Terminal registers with the Network provider it will display this
icon.
Note: Bluetooth Connectivity complies with Bluetooth v2.1 EDR (Enhanced
Data Rate) Class 1. Operating range is subject to site location and
prevailing conditions: Indoor, up to 70m typically; Outdoor, up to 250m with
clear line of sight.
In addition to the red and blue Bluetooth status icons, segment 2 also
displays the Base Name, up to 9 alphanumeric characters above the “B”.
A signal strength indicator is also displayed

Table of Contents

Related product manuals