Ingenico iWL25 Series - Extra Terminal Functions; Xtra

SKYZER TECHNOLOGIES PAGE 124 OF 132
INGENICO IWL25X 2017 PAYMARK SOFTWARE OPERATING GUIDE Version 1.00
13.1 EXTRA TERMINAL FUNCTIONS
The terminal provides extra terminal functions which are accessible from the
Supervisor menu.
13.1.1 Xtra
Step
Terminal Display
Description
1.0
PAYMARK EFTPOS
1.EFTPOS MENU
2.HOSPITALITY MENU
3.ADMIN MENU
4.SUPERVISOR MENU
Press MENU key and then scroll through using down arrow key until
SUPERVISOR MENU is shown on the display.
Press the corresponding number key or ENTER to access SUPERVISOR menu.
2.0
SUPERVISOR MENU
1.XTRA
2.LOGON
3.DUPLICATE
Press the corresponding number key or down arrow key to select XTRA to access
terminal functions.
3.0
1 Merchant 1
2 Merchant 2
3 Merchant 3
Only applicable with Multi-Merchant setup.
Select the corresponding number on the terminal to select the Merchant followed by
ENTER.
4.0
TERMINAL
FUNCTIONS
Select desired function from option table listed below by pressing the corresponding
number key to activate chosen option.
Example: To print stored transactions totals, press 0 key
NOTE: Upon completion of desired function, terminal will return
to idle screen.
Repeat steps 1-3 if required.
Press #
Terminal Display
Description
PRESS 0: Print Stored Transaction Totals
PRINTING
Terminal will display PRINTING and will print a record of all stored transactions
awaiting transmission in the terminal.
PRESS 1: Terminal Restart
RESTART
TERMINAL?
Press ENTER to restart the terminal CANCEL to return to idle prompt.
If ENTER key is pressed, terminal will restart and soon return to idle prompt.