166
After the OS is installed, check whether the existing driver versions match the
server OS. If the driver versions do not match, install the drivers of the required
versions. For detailed operations, see 8
Installing/Updating the Drivers and
Firmware.
7.6 Installing the OS (SLES 15 SP2)
This section guides you on how to install the OS by directly using the OS installation
CD-ROM or ISO image.
The setup wizards vary with different OS types, and the setup wizard screens for
operating systems of the same type but different versions are slightly different.
For more details, visit the corresponding OS official websites.
This section demonstrates with the SLES 15 SP2 OS.
Procedure:
1. Load the OS image to go to the initial setup screen. Select Installation and
press <Enter>.
To Next Page
Loading...
