84
Figure 5-46 OS Startup
For more details, refer to the Red Hat installation document
(https://access.redhat.com/documentation/en-
us/red_hat_enterprise_linux/8/html/performing_a_standard_rhel_installati
on/index).
After the OS is installed, check whether the existing driver versions match
the server OS. If the driver versions do not match, install the drivers of the
required versions. For detailed operations, see 8
Installing/Updating the
Drivers and Firmware.
5.8 Installing the OS (VMware ESXi 6.7 Update
3)
The setup wizards vary with different OS types, and the setup wizard screens for
operating systems of the same type but different versions are slightly different.
For more details, visit the corresponding OS official websites.
This section demonstrates with the VMware ESXi 6.7 Update 3 OS.
Procedure:
To Next Page
Loading...
