Copyright © 2021-2022 Inspur Electronic Information Industry Co., Ltd. All rights
reserved.
No part of this document may be reproduced or transmitted in any form or by any
means without prior written consent of Inspur.
Disclaimer
The purchased products, services and features shall be bound by the contract made
between Inspur and the customer. All or part of the products, services and features
described herein may not be within your purchase or usage scope. The information in
this document is subject to change without notice. Unless otherwise specified in the
contract, this document is offered as a guide only. All statements, information and
recommendations in this document do not constitute a warranty of any kind, express
or implied. Inspur shall not be liable for technical or editorial errors or omissions
contained in this manual.
Trademarks
Inspur and Inspur Logo are registered trademarks of Inspur.
All the other trademarks or registered trademarks mentioned herein are the property of
their respective holders.
Statement of Use
Please read through the following statements carefully before using our server. You
may only start using this server after you have read the following statements and
agreed to the terms below. For any questions on the terms below, please contact your
supplier or contact us directly. If you have not raised any questions on the terms below
and start using this server, it is assumed that you have agreed to the following terms.
DO NOT alter any parameters in the BIOS of this server at any time, except for the
parameters we promote that you can alter.
Contact Inspur Customer Service and provide detailed hardware configurations of
the server in case of a hardware failure or upgrade. DO NOT remove the top cover
or any hardware inside on your own.
The memories, CPUs, CPU heatsinks, fans, drive trays, drives and PSUs are of
particular specifications and cannot be mixed with the components of other server
models.
In case of any software problems, we recommend you to contact the software