Intel Altera Agilex 7 - Installing the Intel FPGA Download Cable II Driver

2.3.4. Installing the Intel FPGA Download Cable II Driver
The Agilex 7 FPGA I-Series Transceiver Development Kit includes onboard Intel FPGA
Download Cable circuits for FPGA and system MAX 10 programming. However, for the
host computer and board to communicate, you must install the Intel FPGA Download
Cable driver on the host computer.
Installation instructions for the Intel FPGA Download Cable driver for your operating
system are available on the Intel website.
On the Intel website, navigate to the Cable and Adapter Drivers Information link to
locate the table entry for your configuration and click the link to access the
instructions.
Related Information
• Cable and Adapter Drivers Information
• Intel FPGA Download Cable II User Guide
2. Getting Started
776646 | 2024.11.21
Agilex
™
7 FPGA I-Series Transceiver (6 × F-Tile) Development Kit User Guide
Send Feedback
10