Intel Altera Agilex 7 - Board Information; The GPIO Tab

Board Information
The board information control displays static information about your board.
• Board Name: Indicates the official name of the board given by the BTS.
• Board Revision: Indicates the revision of the board.
• MAX Version: Indicates the version of the system MAX 10.
JTAG Chain
The JTAG chain control shows all the devices currently in the JTAG chain.
Note: You should place the system MAX 10 and FPGA in the JTAG chain when running the
BTS GUI.
4.2.4. The GPIO Tab
The GPIO tab allows you to interact with all the general-purpose user I/O components
on your board. You can turn LEDs on or off and see the status of push buttons and DIP
switches.
Figure 10. The GPIO Tab
The following sections describe the controls on the GPIO tab.
4. Board Test System
776646 | 2024.11.21
Agilex
™
7 FPGA I-Series Transceiver (6 × F-Tile) Development Kit User Guide
Send Feedback
20