Figure 27. Si5518
Import
You can generate the register list from the ClockBuilder Pro tool and import it into
Si5518 to update the settings of RAM. Register changes are volatile after power
cycling.
Default
Sets the frequency for the oscillator associated with the active tab back to its default
value. This can also be accomplished by power cycling the board.
Soft Reset
Initiates a global soft reset. The global soft reset does not download the firmware and
frequency plan from NVM. Instead, it restarts the firmware and frequency plan that
are currently running on the device. The device acts like it has been rebooted.
Related Information
Skyworks Solution
More information about the Clockbuilder Pro software.
4. Board Test System
776646 | 2024.11.21
Agilex
™
7 FPGA I-Series Transceiver (6 × F-Tile) Development Kit User Guide
Send Feedback
36
To Next Page
Loading...
