Intel Video Driver Controls
B - 8 Display Modes
B
To Enable Intel(R) Dual Display Clone
1. Attach your external monitor to the external monitor port, and turn it on.
2. Go to the Intel(R) GMA Driver for mobile control panel (see “Intel Graphics
Properties” on page B - 2) and click Display Devices.
3. Click to choose Intel(R) Dual Display Clone (Operating Mode).
4. Choose which device is to be the Primary Device/Secondary Device from the
Display Selection menu.
5. Click Apply, and OK to confirm the settings change.
6. Click Display Settings to adjust the settings for the attached devices.
Figure B - 6
Display Devices &
Settings
To Next Page
Loading...
