EasyManuals Logo
Home>Intellian>Antenna>GX100NX

Intellian GX100NX User Manual

Intellian GX100NX
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
47
Operating Install Wizard
Operating Install Wizard
Turning On System
Make sure the antenna has a clear view of the sky. Press the Power button on the front of the Below Deck
Termial (BDT) then a wait few minutes for system startup. Once the antenna nds the satellite, the "POWER"
status lights will be lit Green.
Accessing AptusNX
The network is automatically congured by DHCP without the need for additional PC IP conguration.
1. Connect an Ethernet cable from the Management LAN port on the front of the BDT to the LAN port of PC.
2. The network connection is established automatically.
3. Use the following IP address to access Intellian AptusNX page.
IP Address: 192.168.2.1 (Default)
4. Log into the AptusNX by typing in User Name and Password information. If this system has not been
changed from the factory default:
User Name: intellian
Password: 12345678
Management LAN Port
BDT - Front Panel
Figure: Front Panel Management LAN Port Connection
PC
(Not supplied)

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intellian GX100NX and is the answer not in the manual?

Intellian GX100NX Specifications

General IconGeneral
BrandIntellian
ModelGX100NX
CategoryAntenna
LanguageEnglish

Related product manuals