97
Using AptusNX
2. Once the diagnosis starts, the page will indicate test status. It should take a few minutes to complete the
test.
3. After the diagnosis is completed the system shows the diagnosis results of each item. You can save the
results to the BDT by clicking the "Save Result" button and print this page by clicking the "Print" button.
To remove the result, click the "Clear Diagnosis" button.
4. When you want to check the recently saved diagnosis results, click the "View Last Report" button. The
pop-up page of the diagnosis results, including the save date and time, will appear. You can print this page
by clicking the "Print" button.
1
2
To Next Page
Loading...
Need help?
General
