14BChapter 15: Storage management
108 TruVision DVR 44HD User Manual
Figure 31: Bad sector detection window
To detect bad sectors:
1. From the menu toolbar, click Storage Management > Bad Sector Detection.
2. Select the HDD you want to test.
3. Select whether you want to do a key area detection or a full detection and click Detect.
4. The system checks the HDD. The color-coded result is displayed on screen. If there are bad
sectors found, click Error Info to see a list of the errors found.
5. If required, click Pause to pause the test or Cancel to cancel it.
6. Click Exit to return to live view.
Install HDDs
You can install up to four HDDs.
Caution: Do not insert or remove HDDs with the recorder powered up.
Note: This unit contains electrostatic-sensitive components. Before handling the HDDs, make
sure you are properly grounded to avoid ESD damage.
To install a HDD:
1. Unpack the recorder box.
2. Unpack the recorder HDD box.
Note: HDDs in the shipping box are pre-mounted with their rail kits/caddy.
To Next Page
Loading...
