9BChapter 10: Camera setup
66 TruVision DVR 44HD User Manual
Send an email to a specified address when there is a line crossing
detection alarm.
Note: You must configure email settings before enabling this option.
See “E-mail settings” on page 81
for further information. If you want to
send the event snapshot together with the email, check the “Attached
Snapshot” option.
Capture the image when an alarm is triggered and upload the picture
to NAS or FTP server.
Note: To upload the snapshot to NAS, you must first configure the
NAS settings. See “Add a network storage system” on page 109 for
further information.
To upload the snapshot to an FTP, you must first configure the FTP
settings. See “Configure an FTP server to store snapshots” on page
82.
To upload the snapshot to FTP and NAS when motion detection or
alarm input is triggered, you must also enable Upload Snapshots to
FTP under the alarm input actions. See “Alarm notification types” on
page 93 for further information.
Trigger external alarm outputs when an event occurs. Check “Select
All” or each individual alarm output.
Note: This option is only supported by cameras that support alarm
output.
11. Click Apply to save changes.
12. Click Exit to return to live view.
Intrusion detection
You can set up an area in the surveillance scene to detect when intrusion occurs. If someone
enters the area, a set of alarm actions can be triggered.
To Next Page
Loading...
