9BChapter 10: Camera setup
TruVision DVR 44HD User Manual 59
Note: If cameras still have default settings, they might have the same IP addresses. This
creates an IP conflict. Use the Edit button to assign a different IP address to each camera.
Ensure that for each camera to successfully connect the cameras.
To manually add an IP camera:
1. From the menu toolbar, click Camera Setup > IP Camera Status.
2. Click Manual Add. In the pop-up window, enter the camera details such as the IP camera
address/domain, protocol, management port, user name and password. Click OK.
The camera is added to the end of the list of devices.
Note: Only one camera can be manually added at a time.
Camera recording settings
To configure recording settings:
1. From the menu toolbar, click Camera Recording Settings.
2. Select the camera you want to configure.
3. Configure the following recording settings (options available depend on the camera model):
• Stream Record Mode: Select one of the stream types to configure the recording
parameters of that record mode: Mainstream (TL-Hi) (default), Mainstream (TL-Lo),
Mainstream (Event), Mainstream (Alarm), or Substream.
• Stream Type: Select the type of stream to record, either video or video and audio.
• Resolution: Select the resolution of the recording. Options include: 1920*1080 (1080P),
1280*720 (HD720P), 960*576 (960H), 704*576 (4CIF), 640*480 (VGA), 352*288 (CIF).
To Next Page
Loading...
