9BChapter 10: Camera setup
74 TruVision DVR 44HD User Manual
5. In the preset tour toolbar, click to call up the preset tour.
6. Click Exit to return to live view.
To call up a preset tour:
1. Click the PTZ Settings icon on the menu toolbar and select More Settings.
2. Select the desired preset tour from the list and click to start the tour. Click to stop
the preset tour.
3. Click Back to return to live view.
To delete a preset tour:
1. From the menu toolbar, click Camera Setup > PTZ Preset/Tours.
2. From the preset tour list, select a tour number and click to delete the selected the
preset tour.
– Or –
In the preset tour toolbar, click to delete all the preset tours.
3. Click Exit to return to live view.
To set up a shadow tour:
1. From the menu toolbar, click Camera Setup > PTZ Preset/Tours.
2. Select the shadow tour from the drop-down list.
3. To record a new shadow tour, click and use the directional buttons on the PTZ control
panel to move the camera along the desired path.
4. Click to save the shadow tour.
Note: The shadow tour can be overwritten.
5. Click Exit to return to live view.
To call up a shadow tour:
1. From the menu toolbar, click Camera Setup > PTZ Preset/tours.
2. Select the shadow tour from the list and click to start the tour. Click to stop the
shadow tour.
3. Click Exit to return to live view.
V-stream encoding
The V-stream shows all camera channels within one camera tile. V-stream is available for
remote use with the browser interface, mobile application, TruVision Navigator or third party
software implementation.
This feature is particularly useful if you have limited bandwidth available on a remote location
but still want to be able to view all camera tiles at once.
To Next Page
Loading...
