Interlogix TruVision DVR 44HD - Layout

8BChapter 9: Display settings
54 TruVision DVR 44HD User Manual
Option Description
Modify the video standard used to PAL or NTSC, and click Apply.
2.
Picture Setting
Define the desired output mode.
Select one of the options from the drop-down list: Standard, Bright, Soft
, or Vivid,
and click Apply.
3.
BNC Output Brightness
Modify the video output brightness.
Adjust the scroll bar point to the desired level and click Apply.
4.
Resolution
Define the resolution of the selected monitor.
Select one of the options from the drop-down list and click Apply. The selected
resolution must be the same as that of the monitor.
5.
Display Status Icons
Define whether the status icons are displayed. Default is Enable.
6.
Timebar Transparent
Select the transparency of the monitor output time bar on screen relative to the
background to make the time bar easier to read.
Check the box to enable/disable. Default is Disable.
7.
Enable Timebar
Select whether the monitor output time bar appears on screen.
Check the box to enable/disable. Default is Enable.
8.
Video Output Interface
Select the desired video output interface to apply: Main BNC or VGA/HDMI.
Default is VGA/HDMI.
9.
Default View
The factory default multiview format displays all channels (2x2 layout for the 4-
channel TVR 44HD and 4x4 layout for the 8/16-channel TVR 44HD).
10.
Sequence Dwell Time
Set the length of time for which a camera image is displayed on the selected
monitor before moving to the next camera during sequencing. Default is off (“No
Switch”).
11.
Enable Audio Output
Select whether to hear audio from cameras in both live and playback mode.
However, in order to be able to hear audio in playback, you must enable the
audio output setting. Default is Disable.
Check the box to enable/disable audio output.
12.
Event Monitor
Select which monitor will be the event monitor showing full screen monitoring in
case of events: HDMI/VGA, or Main BNC. Default is Main analog.
13.
Event Full Screen Monitoring
Dwell Time
Set the length of time
during which an image is displayed on the event monitor in
full screen in case of an event. Default is 10 seconds.
14.
Alarm Full Screen Monitoring
Dwell Time
Set the length of time during which an image
is displayed on the event monitor in
full screen in case of an alarm. Default is 10 seconds.
Layout
The Layout window allows you to define the layout of each of the different views as they are
shown when selecting the different live views or the sequencing order.
The cameras are sequenced in numeric order by default. You can change the order of the
cameras for all monitors.