4BChapter 5: Live view
30 TruVision DVR 44HD User Manual
Single and multiview display mode
The recorder has single and multiview formats. The number of multiview display modes
available depends on the recorder model.
Single view display
format
Press the numeric button on the front panel to switch to the corresponding camera
display. For example, press button 10 to view camera 10.
-Or-
Right-click the mouse and select Single Camera from the menu. Select the required
camera from the list.
Multiple view display
format
Press the Display button on the front panel to cycle through different display formats.
-Or-
Right-click the mouse and select Multi Camera from the menu. Select the desired
multiview display layout.
Sequencing cameras
The sequencing feature allows a camera to be displayed briefly on screen, before advancing to
the next camera in the sequence list. Sequencing can only be done in single-view display
mode.
The default sequence displays each camera in numerical order. However, each camera on the
main and event monitors can have a pre-programmed dwell time and sequence order. See
“Layout” on page 54 for more information.
Note: Dwell time must not be set to zero for sequencing to function.
Sequencing cameras using the front panel:
Select the camera where you want to start sequencing. Press the Seq button on the front
panel to start sequencing. Press it again to stop sequencing.
Sequencing cameras using the mouse:
Select the camera where you want to start sequencing. Right-click the mouse and select
Start Sequence to start the sequencing. Right-click again and select Stop Sequence to
stop sequencing.
Live view toolbar
The live view toolbar in live view lets you quickly access regularly used commands. Position the
cursor over a video image and left- click the mouse. The toolbar appears (see Figure 16 on
page 31).
To Next Page
Loading...
