Interlogix TruVision DVR 44HD - General Recorder Settings

13BChapter 14: Device management
98 TruVision DVR 44HD User Manual
General recorder settings
Use the this menu of Device Management to configure general recorder options.
See Figure 29 and Table 14 on page 98 for the general options available. The changes are
immediately implemented once Apply is clicked to save the settings.
Figure 29: General settings of the recorder
Table 15: Description of the Monitor setup window: General settings
Option Description
1.
Language
Define the language of the system.
Select the desired language from the drop-down list and click Apply. The
language displayed changes immediately.
Default is English.
2.
Device Name
Define the recorder name. The default name is TVR 44HD.
Click the edit box and enter the new name from the soft keyboard.
3.
Remote Control ID
The device number to use for the recorder when linking the device to a remote
control. The default value is 255.
4.
Keypad Zone ID
Each recorder in a daisy chain must have a unique zone ID so that it can be
controlled by a RS-485 wired keypad. This is not required when using IP keypads.
The default value is 1.
5.
Password R
equired Define whether a login password is required to open the menu.
Check the box to enable/disable and click Apply.
Default is Disable.
6.
Enable Wizard
Immediately start the wizard without rebooting the system.
Check the box to enable/disable and click Apply.
Default is Enable.
Note: For enhanced security, it is recommended to disable.