Interlogix TruVision DVR 44HD - Page 99

13BChapter 14: Device management
TruVision DVR 44HD User Manual 97
Figure 28: Time and date settings window
Table 14: Description of the Time and Date settings window
Option Description
1.
Time
Zone Select a time zone from the list.
2.
Date
Format Select the date format from the drop-down list. Default format is DD-MM-YYYY.
3.
Time
Format Select either the 12-hour or 24-hour time format from the list. Default format is 24-
hour format.
4.
Display
Week Check to display the day of the week in the monitor time bar.
Check the box to enable/disable. Default is Disable.
5.
System
Date Enter the system date.
Default date is the current date.
6.
System
Time Enter the system time.
Default time is the current time.
7.
Auto DST A
djustment Enable to activate DST is automatically. It depends on the time zone selected.
Default is Disable.
8.
Enable DST
Manually define DST. If this option is selected, the Auto DST adjustment option is
disabled.
Default is Disable.
Click the check box to enable or disable daylight savings time (DST).
From
Enter the start date and time for daylight savings.
To
Enter the end date and time for daylight savings.
DST B
ias Set the amount of time to move DST forward from the standard time. Default is 60
minutes.