. Type of recording:
Dark green: Indicates video recorded based on the recording schedule defined.
Red: Indicates video recorded triggered by an alarm event.
Yellow: Indicates video recorded triggered by motion detection.
Blue: Indicates video recorded triggered by a POS/ATM text recording.
Pale green: Indicates manually recorded video.
Select a camera and a day to search from on the calendar displayed, and then click Search.
The timeline below the page indicates video recorded for the specified day. The timeline also
classifies by color the type of recording with each type.
Click and drag the marker across the timeline on where you want video playback to begin, and
then click Play on the playback control toolbar. You can capture a snapshot of a video image,
save the video playback, or download the recorded video.
Search for event logs
The recorder compiles a log of events, such as the start or end of video recording, recorder
notifications, and alarms, through which you can easily search. Logs are categorized by the
following types:
• Alarm: Includes motion detection, tamper detection, video tampering, and other alarm
events
• Notifications: Includes system notifications such as video loss, HDD failures, and other
system-related events
• Operations: Includes users access to the web interfaces and other operational events
• Information: Includes general information on the recorder actions, such as the start and
end of video recording, etc.
To search for logs, click Log on the menu bar, select a log type, specify a date and time range,
and then click Search. See Figure 35 on page 127 for an example of the results of a log search.
For further information on searching and viewing logs, go to “Search the system log” on page
118.
To Next Page
Loading...
