Interlogix TruVision DVR 44HD - Using the Mouse

3BChapter 4: Operating instructions
TruVision DVR 44HD User Manual 21
Task
Button
Button function
Play Press to do an auto tour.
Display Press to delete a selected key point from the PTZ Setting > More
Settings> Tour > Key Point list.
Menu navigation
Direction Press to navigate between different fields and items in menus.
Menu Enter/exit the main menu.
Enter Press to confirm the selection in any of the menu modes.
Using the mouse
The USB mouse provided with the recorder can be used to operate all the functions of the unit,
unlike the front panel which has limited functionality. The USB mouse lets you navigate and
make changes to settings in the user interface.
Connect the mouse to the recorder by plugging the mouse USB connector into the USB port on
the back panel or the front panel. The mouse is immediately operational and the pointer should
appear.
Note: Use a USB 2.0 mouse.
Move the pointer to a command, option, or button on a window. Click the left mouse button to
enter or confirm a selection.
You can purchase a spare mouse by ordering part number TVR-MOUSE-1.
See Table 6 below for a description of the mouse buttons.
Table 4: Mouse buttons
Item
Description
Left button
Single-Click Live view: Select a camera to display the live view toolbar.
Menu: Select a component of a menu, such as a button or an
input field. This is similar to pressing the Enter button on the
remote/front panel controls.
Double-Click Live view: Switch between single screen and multi-screen mode
in live/ playback mode.
Click and Drag Live view: Drag channel/time bar.
PTZ control: Adjust pan, tilt and zoom.
Tamperproof, privacy masking and motion detection
functions: Select the target area.
Digital zoom-in: Drag and select target area.
Right button
Single-Click Live view: Display menu.
Menu: Exit the current menu and return to higher level.
Scroll
-wheel Scroll Up Live view: Return to the previous window.
Menu: Move the selection to the previous item.